Basic Functions:
The various states & signals can be recorded into recorder, including position(longitude & latitude), speed, traveling distance, left-right turn, braking, open/close door, open/close lamp, speaker signal and so on. And, it could upload all these data to management software platform wirelessly so that the platform could remotely monitor and manage the vehicle by real time.
1. Traffic accident preventing
Overspeed alarm and record;
Tired driving alarm and record;
2. Safety management ◎Image capture and remote transmission (optional);
- Recorder could capture image in the vehicle when opening/closing door, and starting/parking the vehicle. It will do the continuous capturing while you press the alarm button, then it upload the image to management software platform automatically so that the platform software could check the image at any time.
Stop vehicle by force
- During emergency situation, management platform could know what is happening in the vehicle via image, if it should stop vehicle remotely by force, the management platform can send the vehicle stopping command, recorder receive that command and stop the vehicle compulsively at once.
3. Vehicle traveling record and management Start record and stop record; Daily statistics; Data record in the traveling condition; Vehicle’s traveling route; Image record within 360 hours; (optional, specifically depending on the SD card’s capacity and capture’s interval)
4. Traffic accident analysis State signal responding to the real time for every time of last 10 times before stopping the vehicle; Record the image in and out the vehicle during the parking according to the pre-seted time interval;
5. Self-test function, Data saving for power-off, Anti-interference function
6. Management of vehicle information and driver files by PC software, U disk and print Identification of driver by IC card. By PC software, parameters can be set and data can be received; Data can be saved by U disk and built-in memory; Data can read by LCD and printer; Data can be uploaded to the monitoring&management platform via internal GPRS module connected to the GSM network.
Specification:
1. Power:
Power voltage DC: 12~24V
Signal voltage DC: 12~24V
2. Consumption current:
<200 mA (standby mode)
<1000 mA (print mode)
3. Recording speed range: 0~255km/h
4. Traveling distance measuring range: 0~999999.9km
5. Sampling rate: 0.2s
6. Speed resolution: 1km/h
7. Clock resolution: 1s
8. Record switch signal quantity: 8 pieces
9. Over speed alarm threshold value: 80km/h (could be set freely)
10. GPS positioning accuracy: < 15M
11. Image resolution: 382x272
12. Protect ability on power-off: more than 10 years
13. Dimensions & weight:
Recorder: 191×142×58mm & 0.85kg
Connecting cable: 0.4kg
Sensor (option): Ф30×132mm: 0.3kg
Accessories:
1. Vehicle Traveling Data Recorder: 1 piece
2. Connection cable: 1 piece
3. Speed sensor: piece (it is available only for the vehicle without the electronic sensor, it is chosen by the local dealer)
4. Maintenance guarantee card, user manual: 1 piece
5. Management software: 1 set (only for the transportation enterprise)